Dansk support

Hurtig levering

PrintaStick 50ml

PrintaStick 50ml

13,26 €
10,05 €

PrintaStick is an adhesive solution for a 3D printer with a heated printbed. The water based formula is developed to work with many different materials and ensures the adhesion of the 3D print till the print has finished.

Unfortunately, the item cannot be purchased, as there are no more in stock
Precautionary Statement

PrintaStick is a build plate adhesive that optimizes the 3D printed model's outcome by preventing warping! It is easy to apply adhesive for build plates that work with all common 3D printing materials and secures the 3D print until the print has finished. The formula is so powerful that for most prints the use of a raft or brim is not necessarily saving time and material. The sponge applicator makes the usage easy, precise and effortless. During application and printing, PrintaStick does not release or produce any unpleasant smell, and after the print is finished, there is no visible trace of the solution on the 3D print. The formula is high temperature resistant and can therefore be used also for technical materials. Advantages Strong formula works for many materials precise to apply high temperature stable no unpleasant smell.

1. Preparation: Shake PrintaStick for a few seconds to mix the solution. Only apply on a cold residue-free printbed. If necessary you can use PrintaClean to remove residue from the printbed.

2. Application: Apply PrintaStick by pressing the sponge applicator on the printbed to release some liquid. Then spread the liquid by moving the sponge in a circular pattern over the printbed. If the sponge hardens – rinse with clean water to soften.

3. Print: Start the printing process with recommended temperature settings. The liquid will dry up during the heat-up process of the printbed.

4. Clean Up: When the printbed cools down the print will loosen from the build plate. Clean up with warm water.

Warning: May produce an allergic reaction