Flashforge PLA Silk
Flashforge PLA Silk
Flashforge PLA Silk guld
Flashforge PLA Silk sølv
Flashforge PLA Silk hvid

Flashforge PLA Silk - 1kg, 1.75mm

Fra 257,00

Det bedste, mest konsistente og mest testede PLA filament indenfor silk.

PLA Silk designet er fremstillet af Flashforge, Flashforge PLA Silk er perfekt til en blank overflade. Denne PLA type kan bruges som guld og sølv. Filamentet giver en flot og ren overflade.

Fremstillet af højkvalitets PLA-materiale for at sikre jævn forsyning og ekstrudering. Egenskaber ved PLA silkeglans: Biologisk nedbrydelig, lavt smeltepunkt, lugtfri, skinnende metaloverflade.

Farve
1
+
Tilføj til kurv
Beskrivelse
Egenskaber
Filament Data Sheet
Downloads

Produktegenskaber


Udskrivningsanbefalinger: Den anbefalede behandlingstemperatur for PLA silkeglans er mellem 200 og 220 grader ekstrudertemperatur med en udskrivningshastighed på 60 til 90 mm/s.

Hvis din printer har en opvarmet byggeplatform, skal du indstille temperaturen til omkring 60 grader. En opvarmet platform er ikke påkrævet til PLA-udskrifter, men er en fordel. Hvis din 3D-printer har en blæser, skal du tænde den, mens du udskriver.

Sørg for, at det første lag materiale hæfter godt nok. Et tyndt lag lim fra en vandvaskbar limstift eller et lag blå malertape vil øge vedhæftningen.

Vægt
1 Kg
Materiale
PLA

Filament Data sheet

FILAMENT TYPE FILAMENT DIAMETER PRINTING TEMP. PRINTING SPEED LAYER HEIGHT PLATFORM TEMP. RAFT DENSITY THE MELT FLOW RATE (190°C, 2.16 kg) WATER ABSORPTION (23°C) TENSILE STRENGTH FLEXURAL STRENGTH TENSILE MODULUS HEAT DEFORMATION TEMP. DIAMETER TOLERANCE ROUNDNESS DEVIATION
ABS 1.75mm/3mm 220~260°C 60~90mm/s 0.1~0.2mm 80~110°C(<100°C, Porous plate) Yes 1.04±0.2g/cm3 2~4g/10min 1% ≥43MPa ≥70MPa ≥2300MPa ≥88℃ ±0.05mm ≤0.05mm
ABS Pro 1.75mm/3mm 220~260°C 60~90mm/s 0.1~0.2mm 50~100°C, (<80°C, Porous plate) No 1.08±0.2g/cm3 2~4g/10min 1% ≥53MPa ≥70MPa ≥2300MPa ≥88℃ ±0.05mm ≤0.05mm
HIPS 1.75mm/3mm 220~260°C 60~90mm/s 0.1~0.2mm 80~110°C(<100°C, Porous plate) Yes 1.04±0.2g/cm3 2~5g/10min 1% ≥30MPa ≥60MPa ≥1800MPa ≥90℃ ±0.05mm ≤0.05mm
PETG 1.75mm/3mm 230~250℃ 60~90mm/s 0.1~0.2mm 80~100℃ No 1.27±0.05g/cm3 5~7g/10min 0.3% ≥52MPa ≥88MPa ≥2200MPa ≥70℃ ±0.05mm ≤0.05mm
PA (Nylon) 1.75mm 220~260℃ 60~90mm/s 0.1~0.2mm 80~100℃ Yes 1.01±0.05g/cm3 5~7g/10min 0.5% ≥50MPa ≥60MPa ≥1500MPa ≥100℃ ±0.05mm ≤0.05mm
PP 1.75mm 200~240℃ 30~60mm/s 0.1~0.2mm 80~110℃(<100℃, Porous plate) Yes 0.93±0.05g/cm3 20~22g/10min 0.5% ≥20MPa ≥20MPa ≥1000MPa ≥100℃ ±0.05mm ≤0.08mm
PC 1.75mm 240~260℃ 60~90mm/s 0.1~0.2mm 100~120℃ Yes 1.20±0.05g/cm3 19~21g/10min (300℃, 1.2Kg) 0.5% ≥50MPa ≥65Mpa ≥2200MPa ≥110℃ ±0.05mm ≤0.08mm
PVA 1.75mm/3mm 190~220℃ 60~90mm/s 0.2mm Not necessary No 1.25±0.05g/cm3 2~4g/10min NA ≥10MPa ≥15MPa ≥190MPa ≥55℃ ±0.08mm ≤0.08mm
ASA 1.75mm 240~260℃ 40-60mm/s 0.1~0.2mm 100~110℃ No 1.09±0.01g/cm3 3~4g/10min 1% ≥45Mpa ≥65Mpa ≥2200MPa ≥80℃ ±0.05mm ≤0.05mm
ELASTIC 1.75mm/3mm 170~220℃ 20~40mm/s 0.2mm Not necessary No 1.25±0.05g/cm3 2~4g/10min 0.5%) ≥35MPa ≥35MPa - - ±0.05mm ≤0.05mm
FLEXIBLE 1.75mm/3mm 180~230℃ 30~60mm/s 0.2mm Not necessary No 1.01±0.05g/cm3 3~6g/10min 0.5% ≥35MPa ≥35MPa - ≥90℃ ±0.05mm ≤0.05mm
CARBON-FIBER REINFORCED FILAMENTS
PETG-CF 1.75mm 230~250℃ 60~90mm/s 0.1~0.2mm 70~90℃ No 1.28±0.05g/cm3 5~15g/10min 0.5% ≥68MPa ≥98MPa ≥2700MPa ≥70℃ ±0.05mm ≤0.05mm
PA-CF 1.75mm 260~280℃ 40~60mm/s 0.1~0.2mm 70~100℃ No 1.24±0.05g/cm3 3~4g/10min 0.3% ≥130MPa - - ≥90℃ ±0.05mm ≤0.05mm
PLA-CF 1.75mm/2.85mm 190~220℃ 60~90mm/s 0.1~0.2mm Not necessary No 1.28±0.05g/cm3 5~15g/10min 0.5% ≥56MPa ≥89MPa ≥2500MPa ≥55℃ ±0.05mm ≤0.05mm
PLA FILAMENTS
PLA 1.75mm/3mm 190~220℃ 60~90mm/s 0.1~0.2mm Not necessary No 1.25±0.05g/cm3 5~7g/10min 0.5% ≥60MPa ≥60MPa ≥2500MPa ≥55℃ ±0.05mm ≤0.05mm
PLA Wood 1.75mm/3mm 180~220℃ 60~90mm/s 0.2mm Not necessary Yes 1.20±0.05g/cm3 5~7g/10min 0.5% ≥40MPa ≥40MPa - ≥50℃ ±0.05mm ≤0.05mm
HS PLA 1.75mm/3mm 190~220℃ 60~150mm/s 0.1~0.2mm Not necessary No 1.25±0.05g/cm3 8~12g/10min 0.5% ≥60MPa ≥60MPa ≥2500MPa ≥55℃ ±0.05mm ≤0.05mm
PLA Metal 1.75mm/3mm 180~220℃ 60~90mm/s 0.2mm Not necessary No 1.45±0.05g/cm3 5~7g/10min 1% ≥50MPa ≥50MPa - ≥50℃ ±0.05mm ≤0.05mm
PLA Rainbow 1.75mm/2.85mm 190~220℃ 60~90mm/s 0.1~0.2mm Not necessary No 1.25±0.05g/cm3 5~7g/10min 0.5% ≥60MPa ≥60MPa ≥2500MPa ≥53℃ ±0.05mm ≤0.05mm
PLA Pearl 1.75mm/3mm 190~220℃ 60~90mm/s 0.1~0.2mm Not necessary No 1.25±0.05g/cm3 3~5g/10min 0.5% ≥50MPa ≥50MPa ≥2300MPa ≥55℃ ±0.05mm ≤0.05mm
PLA Color Change 1.75mm/3mm 190~230℃ 60~90mm/s 0.1~0.2mm Not necessary No 1.25±0.05g/cm3 5~7g/10min 0.5% ≥60MPa ≥60MPa ≥2500MPa ≥55℃ ±0.05mm ≤0.05mm