Perfect to clean clogged nozzles.
To remove a clog with the needle method, an acupuncture or hypodermic needle is required. The size of the needle needs to be small enough to fit the nozzle. For a standard diameter of 0.4mm, the 0.3mm needle works perfect.
1. Preheat the nozzle to the regular printing temperature for the material last in use. Be careful, the nozzle is hot and the all-metal construction of the needle conducts heat well.
2. Insert the needle from below and carefully move it around. The goal is to break the blockage and clear the nozzle.
3. Then remove the needle and insert filament manually from above and & push through. If the blockage is not yet clear repeat the steps. If this method does not work an alternative is the cold pull method.
The sharp flexible needle makes loosen clogged residue easy and effortless. The all-metal quality build was specially chosen to withstand the heat of the nozzle and to be safe from melting plastic.