If you need to print with Flashforge PA, then we recommend that you use a Flashforge Filament Mate, it helps to reduce the amount of moisture that is absorbed by the filament, moisture in the filament makes it harder to achieve good and consistent results when printing.
Flashforge PETG-CF is a high-performance 3D printing material, it has the features of high strength and high abrasion resistance.
It is produced by carbon fibre reinforced PETG material. This not only increases the toughness of the material substantially but also greatly reduces the shrinkage of the material.
When printing, you only need the ordinary heating platform, without using the thermal printing cavity you can get a stable size, good interlayer bonding and smooth surfaces on your model.
| Printing temperature | 230 ° C - 250 ° C |
| Printing speed | 40 - 60 mm / s |
| Platform temperature | 60 ° C - 80 ° C |
| Tensile strength | ≥68 MPa |
| Flexural strength | ≥98 MPa |
| Elongation at Break | ≥50 % |
