Flashforge TPU95 (Elastic) - 1kg, 2.85mm


50,08 €
Item number: 225258
  • Extruder temperature 180 to 260℃
  • Platform temperature 20 to 60℃
  • Print speed 20 to 40 m/s
  • Cooling fan on
  • Filament diameter 2.85MM

Flashforge´s Elastic Consumable is soft, high toughness and high resilience 3D Print consumable. Suitable for most proximal feeds FFF 3D Printers.

The product uses thermoplastic polyurethane as raw material, the surface hardness is Shore 95A, it can be stretched to the original length of 3 times more.

The interlayer bonding of the print model is very good, the strength of Z-axis direction is not weaker than X, Y-axis direction.
Add to basket
Prices are incl. VAT

Product Features

This material will happily print without a heated bed, but with a heated bed available, it likes to sit at around 50 degrees. A good temperature for the nozzle is between 190 and 200 degrees, depending on the thickness of the layers being used. Because this is an incredibly flexible and stretchy filament, it needs to print much slower than other more rigid filaments, at around 20-30 mm/s, and only with a direct drive extruder. 

1 Kg