Kontakt os på mail for et skræddersyet tilbud: info@flashforge.dk
Creator 4 er en højtydende, fleksibel og intelligent 3D-printer, perfekt til jeres kommercielle print.
Creator 4 har et termisk kontrol system, der kan holde en konstant temperatur i printkammeret op til 65°C, hviket mindsker sammentrækning og revner på jeres printede modeller.
Den har et stort byggeområde, som sammen med dens uafhængige ekstrudere enten kan bruges til at printe store emner eller printe 2 ens emner på samme tid, hvilket gør den god til masse produktion.
Dobbelt ekstrudere, der arbejder selvstændigt
De to ekstrudere i Creator 4 arbejder uafhængigt af hinanden, ikke bundtet sammen, så når du vælger en ekstruder, der arbejder, forsvinder den anden ekstruder væk fra udskrivningsområdet og dermed ikke ekstra overfyldte filamenter på det trykte objekt. De to ekstrudere kunne også arbejde samtidigt og uafhængigt for at fordoble dine output! Creator 4 er et godt valg til masseproduktion!
3 Ekstruderindstillinger der understøtter flere filamenter
Ekstruder-F til fleksibel filament.
Ekstruder-HTtil ingeniørfilament.
Ekstruder-HS til kulfiberkomposit.
Extruder-F
Printing for 85A Flexible Filament
Printing Speed
100mm/s
Filament Diameter
2.85mm
Printing Temperature
265℃
Supported Filament
TPU85A / TPE / TPB / TPC
Extruder-HT
Printing for Engineering Filament
Printing Speed
200mm/s
Filament Diameter
1.75mm
Printing Temperature
320℃
Supported Filament
PC / PA / PP / PETG / ASA / ABS / PLA / PC-ABS / PAHT
Extruder-HS
Printing for Carbon Fiber Composite
Printing Speed
150mm/s
Filament Diameter
1.75mm
Printing Temperature
360℃
Supported Filament
PACF / PET-CF / PP-CF / PA-GF / PC-ABS / PP-GF / PPS-CF / PPS
The advanced thermal-control system of Creator 4 keeps the print chamber at 65℃, which effectively reduces model shrinkage, warping at corners, and furnish breakage. Creator 4 ensures good printout quality, good printing precision and improves print success rate a lot.
Different filaments can be automatically adjusted to different preheating temperatures in the chamber, achieving higher success rate of printing. When finishing printing, the chamber temperature can be adjusted automatically for model cooling down. Quite friendly system design for next print!
HEPA 13 Air Filter
7-Inch smart touch screen
Camera with remote control
Printing resuming after recovering from power failure
Built-in-filament 2kg + 1kg
Auto power-off
The Filament Drying Station is a multifunctional product that integrates 3D printing equipment placement, storage and drying of 3D printing filaments, and the movable shelf function. As a matching product of Creator 4, it aims to restore the properties of the wet filaments and solve the problem of the drying and storage of filaments;
As its size matches the size of Creator 4, it can be used as an elevated shelf; With casters equipped, it is convenient for movement and switching the working area at will.
The Filament Drying Station improves the whole process of 3D printing, ensures the stable use of filaments throughout the whole workflow, prolongs the normal running time of your printer to the maximum extent, and guarantees the printing quality.
| Type | / | Creator 4-A | Creator 4-S |
| Ekstruder | Ekstruder-F (optional) | Ekstruder-HT | Ekstruder-HS |
| Filament | TPU85A / TPE / TPB / TPC | PLA / PETG / PC-ABS / PAHT / ABS /ASA / PP / PA / PC | PACF / PET-CF / PP-CF / PA-GF / PC-ABS / PP-GF / PPS-CF / PPS |
| Ekstruder type | IDEX | IDEX | IDEX |
| Dyse diameter | 0.4mm | 0.4(0.6/0.8)mm | 0.4(0.6/0.8)mm |
| Ekstruder temperature | 265℃ | 320℃ | 360℃ |
| Maximum chamber heating temperature | 65℃ | 65℃ | 65℃ |
| Printing volume | 400*350*500mm | 400*350*500mm | 400*350*500mm |
| Printe-hastighed | 100mm/s | 200mm/s | 150mm/s |
| Maximum platform heating temperature | 130℃ | 130℃ | 130℃ |
| Touch screen size | 7-inch | 7-inch | 7-inch |
Dual extruders working independently
The two extruders of Creator 4 work independently, not bundled together so that when you select one extruder working the other extruder goes away from the printing area hence not extra overflowing any filaments on the printed object. Also, the two extruders could work simultaneously and independently to double your outputs! Creator 4 is a good choice for mass production!
3 Extruder options support multiple filaments
Extruder-F for flexible filament.
Extruder-HT for engineering filament.
Extruder-HS for carbon fiber composite.
Extruder-F
Printing for 85A Flexible Filament
Printing Speed
100mm/s
Filament Diameter
2.85mm
Printing Temperature
265℃
Supported Filament
TPU85A / TPE / TPB / TPC
Extruder-HT
Printing for Engineering Filament
Printing Speed
200mm/s
Filament Diameter
1.75mm
Printing Temperature
320℃
Supported Filament
PC / PA / PP / PETG / ASA / ABS / PLA / PC-ABS / PAHT
Extruder-HS
Printing for Carbon Fiber Composite
Printing Speed
150mm/s
Filament Diameter
1.75mm
Printing Temperature
360℃
Supported Filament
PACF / PET-CF / PP-CF / PA-GF / PC-ABS / PP-GF / PPS-CF / PPS
The advanced thermal-control system of Creator 4 keeps the print chamber at 65℃, which effectively reduces model shrinkage, warping at corners, and furnish breakage. Creator 4 ensures good printout quality, good printing precision and improves print success rate a lot.
Different filaments can be automatically adjusted to different preheating temperatures in the chamber, achieving higher success rate of printing. When finishing printing, the chamber temperature can be adjusted automatically for model cooling down. Quite friendly system design for next print!
HEPA 13 Air Filter
7-Inch smart touch screen
Camera with remote control
Printing resuming after recovering from power failure
Built-in-filament 2kg + 1kg
Auto power-off
The Filament Drying Station is a multifunctional product that integrates 3D printing equipment placement, storage and drying of 3D printing filaments, and the movable shelf function. As a matching product of Creator 4, it aims to restore the properties of the wet filaments and solve the problem of the drying and storage of filaments;
As its size matches the size of Creator 4, it can be used as an elevated shelf; With casters equipped, it is convenient for movement and switching the working area at will.
The Filament Drying Station improves the whole process of 3D printing, ensures the stable use of filaments throughout the whole workflow, prolongs the normal running time of your printer to the maximum extent, and guarantees the printing quality.
