Det bedste, mest konsistente og mest testede PLA filament indenfor silk.
PLA Silk designet er fremstillet af Flashforge, Flashforge PLA Silk er perfekt til en blank overflade. Denne PLA type kan bruges som guld og sølv. Filamentet giver en flot og ren overflade.
Fremstillet af højkvalitets PLA-materiale for at sikre jævn forsyning og ekstrudering. Egenskaber ved PLA silkeglans: Biologisk nedbrydelig, lavt smeltepunkt, lugtfri, skinnende metaloverflade.
Produktegenskaber
Udskrivningsanbefalinger: Den anbefalede behandlingstemperatur
for PLA silkeglans er mellem 200 og 220 grader ekstrudertemperatur med en
udskrivningshastighed på 60 til 90 mm/s.
Hvis din printer har en opvarmet byggeplatform, skal du
indstille temperaturen til omkring 60 grader. En opvarmet platform er ikke
påkrævet til PLA-udskrifter, men er en fordel. Hvis din 3D-printer har en
blæser, skal du tænde den, mens du udskriver.
Sørg for, at det første lag materiale hæfter godt nok. Et
tyndt lag lim fra en vandvaskbar limstift eller et lag blå malertape vil øge
vedhæftningen.
| FILAMENT TYPE | FILAMENT DIAMETER | PRINTING TEMP. | PRINTING SPEED | LAYER HEIGHT | PLATFORM TEMP. | RAFT | DENSITY | THE MELT FLOW RATE (190°C, 2.16 kg) | WATER ABSORPTION (23°C) | TENSILE STRENGTH | FLEXURAL STRENGTH | TENSILE MODULUS | HEAT DEFORMATION TEMP. | DIAMETER TOLERANCE | ROUNDNESS DEVIATION |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ABS | 1.75mm/3mm | 220~260°C | 60~90mm/s | 0.1~0.2mm | 80~110°C（＜100°C, Porous plate) | Yes | 1.04±0.2g/cm3 | 2~4g/10min | 1% | ≥43MPa | ≥70MPa | ≥2300MPa | ≥88℃ | ±0.05mm | ≤0.05mm |
| ABS Pro | 1.75mm/3mm | 220~260°C | 60~90mm/s | 0.1~0.2mm | 50~100°C, (＜80°C, Porous plate) | No | 1.08±0.2g/cm3 | 2~4g/10min | 1% | ≥53MPa | ≥70MPa | ≥2300MPa | ≥88℃ | ±0.05mm | ≤0.05mm |
| HIPS | 1.75mm/3mm | 220~260°C | 60~90mm/s | 0.1~0.2mm | 80~110°C（＜100°C, Porous plate) | Yes | 1.04±0.2g/cm3 | 2~5g/10min | 1% | ≥30MPa | ≥60MPa | ≥1800MPa | ≥90℃ | ±0.05mm | ≤0.05mm |
| PETG | 1.75mm/3mm | 230~250℃ | 60~90mm/s | 0.1~0.2mm | 80~100℃ | No | 1.27±0.05g/cm3 | 5~7g/10min | 0.3% | ≥52MPa | ≥88MPa | ≥2200MPa | ≥70℃ | ±0.05mm | ≤0.05mm |
| PA (Nylon) | 1.75mm | 220~260℃ | 60~90mm/s | 0.1~0.2mm | 80~100℃ | Yes | 1.01±0.05g/cm3 | 5~7g/10min | 0.5% | ≥50MPa | ≥60MPa | ≥1500MPa | ≥100℃ | ±0.05mm | ≤0.05mm |
| PP | 1.75mm | 200~240℃ | 30~60mm/s | 0.1~0.2mm | 80~110℃（＜100℃, Porous plate) | Yes | 0.93±0.05g/cm3 | 20~22g/10min | 0.5% | ≥20MPa | ≥20MPa | ≥1000MPa | ≥100℃ | ±0.05mm | ≤0.08mm |
| PC | 1.75mm | 240~260℃ | 60~90mm/s | 0.1~0.2mm | 100~120℃ | Yes | 1.20±0.05g/cm3 | 19~21g/10min (300℃, 1.2Kg) | 0.5% | ≥50MPa | ≥65Mpa | ≥2200MPa | ≥110℃ | ±0.05mm | ≤0.08mm |
| PVA | 1.75mm/3mm | 190~220℃ | 60~90mm/s | 0.2mm | Not necessary | No | 1.25±0.05g/cm3 | 2~4g/10min | NA | ≥10MPa | ≥15MPa | ≥190MPa | ≥55℃ | ±0.08mm | ≤0.08mm |
| ASA | 1.75mm | 240~260℃ | 40-60mm/s | 0.1~0.2mm | 100~110℃ | No | 1.09±0.01g/cm3 | 3~4g/10min | 1% | ≥45Mpa | ≥65Mpa | ≥2200MPa | ≥80℃ | ±0.05mm | ≤0.05mm |
| ELASTIC | 1.75mm/3mm | 170~220℃ | 20~40mm/s | 0.2mm | Not necessary | No | 1.25±0.05g/cm3 | 2~4g/10min | 0.5%) | ≥35MPa | ≥35MPa | - | - | ±0.05mm | ≤0.05mm |
| FLEXIBLE | 1.75mm/3mm | 180~230℃ | 30~60mm/s | 0.2mm | Not necessary | No | 1.01±0.05g/cm3 | 3~6g/10min | 0.5% | ≥35MPa | ≥35MPa | - | ≥90℃ | ±0.05mm | ≤0.05mm |
| CARBON-FIBER REINFORCED FILAMENTS | |||||||||||||||
| PETG-CF | 1.75mm | 230~250℃ | 60~90mm/s | 0.1~0.2mm | 70~90℃ | No | 1.28±0.05g/cm3 | 5~15g/10min | 0.5% | ≥68MPa | ≥98MPa | ≥2700MPa | ≥70℃ | ±0.05mm | ≤0.05mm |
| PA-CF | 1.75mm | 260~280℃ | 40~60mm/s | 0.1~0.2mm | 70~100℃ | No | 1.24±0.05g/cm3 | 3~4g/10min | 0.3% | ≥130MPa | - | - | ≥90℃ | ±0.05mm | ≤0.05mm |
| PLA-CF | 1.75mm/2.85mm | 190~220℃ | 60~90mm/s | 0.1~0.2mm | Not necessary | No | 1.28±0.05g/cm3 | 5~15g/10min | 0.5% | ≥56MPa | ≥89MPa | ≥2500MPa | ≥55℃ | ±0.05mm | ≤0.05mm |
| PLA FILAMENTS | |||||||||||||||
| PLA | 1.75mm/3mm | 190~220℃ | 60~90mm/s | 0.1~0.2mm | Not necessary | No | 1.25±0.05g/cm3 | 5~7g/10min | 0.5% | ≥60MPa | ≥60MPa | ≥2500MPa | ≥55℃ | ±0.05mm | ≤0.05mm |
| PLA Wood | 1.75mm/3mm | 180~220℃ | 60~90mm/s | 0.2mm | Not necessary | Yes | 1.20±0.05g/cm3 | 5~7g/10min | 0.5% | ≥40MPa | ≥40MPa | - | ≥50℃ | ±0.05mm | ≤0.05mm |
| HS PLA | 1.75mm/3mm | 190~220℃ | 60~150mm/s | 0.1~0.2mm | Not necessary | No | 1.25±0.05g/cm3 | 8~12g/10min | 0.5% | ≥60MPa | ≥60MPa | ≥2500MPa | ≥55℃ | ±0.05mm | ≤0.05mm |
| PLA Metal | 1.75mm/3mm | 180~220℃ | 60~90mm/s | 0.2mm | Not necessary | No | 1.45±0.05g/cm3 | 5~7g/10min | 1% | ≥50MPa | ≥50MPa | - | ≥50℃ | ±0.05mm | ≤0.05mm |
| PLA Rainbow | 1.75mm/2.85mm | 190~220℃ | 60~90mm/s | 0.1~0.2mm | Not necessary | No | 1.25±0.05g/cm3 | 5~7g/10min | 0.5% | ≥60MPa | ≥60MPa | ≥2500MPa | ≥53℃ | ±0.05mm | ≤0.05mm |
| PLA Pearl | 1.75mm/3mm | 190~220℃ | 60~90mm/s | 0.1~0.2mm | Not necessary | No | 1.25±0.05g/cm3 | 3~5g/10min | 0.5% | ≥50MPa | ≥50MPa | ≥2300MPa | ≥55℃ | ±0.05mm | ≤0.05mm |
| PLA Color Change | 1.75mm/3mm | 190~230℃ | 60~90mm/s | 0.1~0.2mm | Not necessary | No | 1.25±0.05g/cm3 | 5~7g/10min | 0.5% | ≥60MPa | ≥60MPa | ≥2500MPa | ≥55℃ | ±0.05mm | ≤0.05mm |
