If you need to print with Flashforge PA, then we recommend that you use a Flashforge Filament Mate, it helps to reduce the amount of moisture that is absorbed by the filament, moisture in the filament makes it harder to achieve good and consistent results when printing.
Flashforge PLA-CF is a high performance 3D printing material with high strength and high abrasion-resistance.
It is produced by carbon fiber reinforced PLA material. The carbon fiber increases the toughness of the material, while also greatly reducing the shrinkage of the material.
| Printing temperature | 200 ° C - 230 ° C |
| Printing speed | 40 - 60 mm / s |
| Platform temperature | 25 ° C - 60 ° C |
| Tensile strength | ≥56 MPa |
| Bending strength | ≥89 MPa |
| Elongation at Break | ≥50 % |
